FTTH Fiber Optic Tool Kit with Fiber Fibra Optica Power Meter and 1mW Visual Fault Locator and Cable Cutter Stripper FC-6S Fiber Cleaver


(as of 03/07/2017)

SKU: B01N6DFXXT Categories: ,


1.FC-6S Fiber Cleaver
Applicable fibers : singlemode/mulitmode use
Fiber Diameter: 125um
Coating Diameter:250um~900um
Typical Cleaver angle: 0.5 degrees
Cleaver length: 9-16mm(single fiber-0.25mm coating)/10-16mm(single fiber-0.9mm coating)
Blade life time : 36000 cleaves (3000 per blade position)
Cleaver dimensions: 63x65x63mm
Weight: 500g
2.Optical power Meter
Wavelength(nm) : 800nm to 1700nm
Detector: InGaAs
Measurement range: -70~+10
Connetor: SC,FC,ST/ Universal 2.5 mm Adaptor Caliberated Wavelength(nm): 850/1300/1310/1490/1550/1625
Resolution(dB): Linear 0.1% or Non-linear 0.01 dBm
Power supply: 3pcs AAA battery (not included) Battery Operating time : 240 h with 1.5V battery (3)
Working Hours: >120 hours (without backlight)
Size: 130x63x29mm
Weight: 160g
3.1mW Visual Fault Finder Output Power: >1mW
Wavelength: 650nm ± 20nm
Connector: 2.5mm Universal connector
2Hz glint or continuous output
Weight: 150g–Small size, easy to field test
4.Flat Drop Optic Cable Stripper
5.Fiber Optic Stripper
6.Tool Bag


  • This is a multifunctional tool kit which provides the tools necessary for the assembly of Mechanical Splices. It will bring you a higher working efficiency
  • This optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
  • The Pen-Type Finder is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in an optical network during and after installation. It includes: Finding the breakpoint, poor connections, bending or cracking in fiber optic cables. Finding the faults of OTDR
  • New Fiber Optic Cable Handle Optical Power Meter -70~+10 dBm FC SC Tester
  • Fixed length guide rail groove 2 1: Can be used for indoor cable stripping coating layer and positioning length It can be used to locate the indoor cable into the optical fiber cutting