Product DescriptionKit includes a 1″ hex ratchet wrench, which allows use with both 3/8″ and 3/4″ draw studs, conduit size die and punch in 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″ and 2″ sizes, ball bearing draw studs with 1″ hex head-3/8″ x 1-5/8″ and 3/4″ x 2-15/16″ and a high impact plastic carrying case. 10 gauge mild steel capacity. 10 pounds.
Unique Slug-Buster punch design creases slug as the punch is drawn into the die.
Slug is split in half as punching operation is completed.
Split slug falls free from the die and stud.
Slug-Buster Knockout Kit with Ratchet Wrench
The Greenlee Slug-Buster knockout kit is favored by most electrical experts. This hole-making kit was made for the serious contractor or electrician, as well as the do-it-yourself handyman, coming complete with the most common size of hole-making tools–including punches, dies, and draw studs–to meet the busy electrician’s needs on the construction site. The Slug-Buster knockout kit also includes a 1-inch hex ratchet for added convenience.
The kit’s punch has a unique profile to make the electrician’s hole making easier. It splits the slug in half making it extremely easy to remove. It will perform punch holes for most conduit sizes including 1/4-inch, 1/2-inch, and 3/4-inch sizes, as well as 1-inch, 1-1/4-inch, 1-1/2-inch, and 2-inch size holes.
Exceptionally resourceful, the tools in the Greenlee Slug-Buster knockout kit will make holes in mild steel and in aluminum up to 10 gauge; they will also punch holes in fiberglass and plastic and can make holes for conduit with an outside diameter of 7/8 inches. Thoughtfully designed, the Slug-Buster can be used with a battery or hydraulic ratchet, as well as a manual ratchet.
Slug-Buster Knockout Punches 0.492 Inch to 2.520 Inches
- Unique punch profile splits slugs for easier slug removal
- Use with battery-powered, hydraulic, ratchet, or manual drivers
- Uses standard Greenlee dies and draw studs
- Slug Buster punches available in sizes up through 2.52 inches (64 mm)
Slug-Buster Knockout Punch Kit Includes:
|Catalog Number||Description||Size of Actual Hole|
|34941||Ratchet wrench with 1-inch hex|
|721-1/2||1/2-inch conduit size punch||7/8 inch||0.885 inch||22.5 mm||16 pg|
|14722||1/2-inch conduit size die||7/8 inch||0.885 inch||22.5 mm||16 pg|
|721-3/4||3/4-inch conduit size punch||–||1.115 inches||28.3 mm||–|
|124AV||3/4-inch conduit size die||–||1.15 inches||28.3 mm||–|
|721-1||1-inch conduit size punch||–||1.362 inches||34.6 mm||–|
|126AV||1-inch conduit size die||–||1.362 inches||34.6 mm||–|
|721-1-1/4||1-1/4-inch conduit size punch||–||1.701 inches||43.2 mm||–|
|128AV||1-1/4-inch conduit size die||–||1.701 inches||43.2 mm||–|
|721-1-1/2||1-1/2-inch conduit size punch||–||1.951 inches||49.6 mm||–|
|440AV||1-1/2-inch conduit size die||–||1.951 inches||49.6 mm||–|
|721-2||2-inch conduit size punch||2-3/8 inches||2.416 inches||61.5 mm||–|
|442AV||2-inch conduit size die||2-3/8 inches||2.416 inches||61.5 mm||–|
|00042||Ball bearing draw stud with 1-inch hex head–3/8 inch by 1-5/8 inches|
|304AVBB||Ball bearing draw stud–3/4 inch by 2-15/16 inches|
Greenlee is a leader when it comes to developing innovative tools for electrical contractors. It started in 1862 with the Greenlee brothers’ barrel-making machines, then woodworking tools. Today, Greenlee is a respected and trusted source for professional-grade wire- and cable-installation tools. From hole making and bending to test and measurement, Greenlee provides an array of tools to make your job faster, safer, and easier.
Greenlee Textron Inc. warrants to the original purchaser of these goods for use that these products will be free from defects in workmanship and material for their useful life, excepting normal wear and abuse.* This warranty is subject to the same terms and conditions contained in the Greenlee Textron Inc. catalog
*Standard one-year limited warranty.
- 1-inch Hex ratchet wrench allows use with both 3/8-inch (9.5 mm) and 3/4-inch (19.1 mm) draw studs
- Unique punch profile also splits slugs for easier slug removal
- Set Includes 1/2, 3/4, 1, 1-1/4, 1-1/2 and 2-inch punches, driver, and draw studs
- Can be used on mild steel up to 10 gauge
- High-impact, rugged plastic carrying case